Cell-excreted proteins mediate the interactions of differently sized silica nanoparticles during cellular uptake.

Exposure to different types of nanoparticles (NPs) results in their deposition in human bodies. While most studies have examined the cellular uptake of only one type of NP at a time, how the dynamics of NP uptake may change in the presence of other types of NPs remains unclear. We therefore investigated the interplay of two differently sized SiO2 NPs during their uptake by A549 human lung carcinoma cells. Both NPs contained a CdSeTe core, which was labeled with different Cd isotopes to differentiate between them. Our study showed that the uptake of one size of SiO2 NPs either increased or decreased with the concentration of the other size of SiO2 NPs. This variation in uptake was attributable to the concentration-dependent aggregation of SiO2 NPs, as determined by the amount of cell-excreted proteins adsorbed on the NP surface. Further, the effects of the protein corona on the attachment of SiO2 NPs to the cell surface and uptake competition between differently sized SiO2 NPs also played important roles. Cell-excreted proteins were then analyzed by proteomics. Overall, the complex interactions between coexisting NPs of different physicochemical properties and cell-excreted proteins should be considered during bio-applications and bio-safety evaluations of NPs.

Turbid Waters and Clearer Standards: Refining Water Quality Criteria for Coastal Environments by Encompassing Metal Bioavailability from Suspended Particles.

Suspended particulate matter (SPM) carries a major fraction of metals in turbid coastal waters, markedly influencing metal bioaccumulation and posing risks to marine life. However, its effects are often overlooked in current water quality criteria for metals, primarily due to challenges in quantifying SPM's contribution. This contribution depends on the SPM concentration, metal distribution coefficients (Kd), and the bioavailability of SPM-bound metals (assimilation efficiency, AE), which can collectively be integrated as a modifying factor (MF). Accordingly, we developed a new stable isotope method to measure metal AE by individual organisms from SPM, employing the widely distributed filter-feeding clam Ruditapes philippinarum as a representative species. Assessing SPM from 23 coastal sites in China, we found average AEs of 42% for Zn, 26% for Cd, 20% for Cu, 8% for Ni, and 6% for Pb. Moreover, using stable isotope methods, we determined metal Kd of SPM from these sites, which can be well predicted by the total organic carbon and iron content (R2 = 0.977). We calculated MFs using a Monte Carlo method. The calculated MFs are in the range 9.9-43 for Pb, 8.5-37 for Zn, 2.9-9.7 for Cu, 1.4-2.7 for Ni, and 1.1-1.6 for Cd, suggesting that dissolved-metal-based criteria values should be divided by MFs to provide adequate protection to aquatic life. This study provides foundational guidelines to refine water quality criteria in turbid waters and protect coastal ecosystems.

Prioritizing ecological restoration in hydrologically sensitive areas to improve groundwater quality.

Greening is the optimal way to mitigate climate change and water quality degradation caused by agricultural expansion and rapid urbanization. However, the ideal sites to plant trees or grass to achieve a win-win solution between the environment and the economy remain unknown. Here, we performed a nationwide survey on groundwater nutrients (nitrate nitrogen, ammonia nitrogen, dissolved reactive phosphorus) and heavy metals (vanadium, chromium, manganese, iron, cobalt, nickel, copper, arsenic, strontium, molybdenum, cadmium, and lead) in China, and combined it with the global/national soil property database and machine learning (random forest) methods to explore the linkages between land use within hydrologically sensitive areas (HSAs) and groundwater quality from the perspective of hydrological connectivity. We found that HSAs occupy approximately 20 % of the total land area and are hotspots for transferring nutrients and heavy metals from the land surface to the saturated zone. In particular, the proportion of natural lands within HSAs significantly contributes 8.0 % of the variability in groundwater nutrients and heavy metals in China (p < 0.01), which is equivalent to their contribution (8.8 %) at the regional scale (radius = 4 km, area = 50 km2). Increasing the proportion of natural lands within HSAs improves groundwater quality, as indicated by the significant reduction in the concentrations of nitrate nitrogen, manganese, arsenic, strontium, and molybdenum (p < 0.05). These new findings suggest that prioritizing ecological restoration in HSAs is conducive to achieving the harmony between the environment (improving groundwater quality) and economy (reducing investment in area management).

Stimulated Raman Scattering Microscopy Reveals Bioaccumulation of Small Microplastics in Protozoa from Natural Waters.

Microplastics (MPs) are pollutants of global concern, and bioaccumulation determines their biological effects. Although microorganisms form a large fraction of our ecosystem's biomass and are important in biogeochemical cycling, their accumulation of MPs has never been confirmed in natural waters because current tools for field biological samples can detect only MPs > 10 µm. Here, we show that stimulated Raman scattering microscopy (SRS) can image and quantify the bioaccumulation of small MPs (<10 µm) in protozoa. Our label-free method, which differentiates MPs by their SRS spectra, detects individual and mixtures of different MPs (e.g., polyethylene, polypropylene, polyvinyl chloride, polyethylene terephthalate, polystyrene, and poly(methyl methacrylate)) in protozoa. The ability of SRS to quantify cellular MP accumulation is similar to that of flow cytometry, a fluorescence-based method commonly used to determine cellular MP accumulation. Moreover, we discovered that protozoa in water samples from Yangtze River, Xianlin Wastewater Treatment Plant, Lake Taihu and the Pearl River Estuary accumulated MPs < 10 µm, but the proportion of MP-containing cells was low (∼2-5%). Our findings suggest that small MPs could potentially enter the food chain and transfer to organisms at higher trophic levels, posing environmental and health risks that deserve closer scrutiny.

Silica nanoparticles inhibit cadmium uptake by the protozoan Tetrahymena thermophila without the need for adsorption.

The simultaneous presence of nanoparticles (NPs) and heavy metals in the environment may affect their mutual biological uptake. Although previous studies showed that NPs could alter the cellular uptake of heavy metals by their adsorption of heavy metals, whether they could affect metal uptake without the need for adsorption is unknown. This study examined the effects of silica (SiO2) NPs on the uptake of Cd ion by the protozoan Tetrahymena thermophila. We found that, even with negligible levels of adsorption, SiO2 NPs at concentrations of 3 to 100 mg/L inhibited Cd uptake. This inhibitory effect decreased as the ambient Cd concentration increased from 1 to 100 µg/L, suggesting the involvement of at least two transporters with different affinities for Cd. The transporters were subsequently identified by the specific protein inhibitors amiloride and tariquidar as NCX and ABCB1, which are responsible for the uptake of Cd at low and high Cd levels, respectively. RT-qPCR and molecular dynamics simulation further showed that the inhibitory effects of SiO2 NPs were attributable to the down-regulated expression of the genes Ncx and Abcb1, steric hindrance of Cd uptake by NCX and ABCB1, and the shrinkage of the central channel pore of the transporters in the presence of SiO2 NPs. SiO2 NPs more strongly inhibited Cd transport by NCX than by ABCB1, due to the higher binding affinity of SiO2 NPs with NCX. Overall, our study sheds new light on a previously overlooked influence of NPs on metal uptake and the responsible mechanism.

Silica Nanoparticle Size Determines the Mechanisms Underlying the Inhibition of Iron Oxide Nanoparticle Uptake by Daphnia magna.

Aquatic environments are complicated systems that contain different types of nanoparticles (NPs). Nevertheless, recent studies of NP toxicity, and especially those that have focused on bioaccumulation have mostly investigated only a single type of NPs. Assessments of the environmental risks of NPs that do not consider co-exposure regimes may lead to inaccurate conclusions and ineffective environmental regulation. Thus, the present study examined the effects of differently sized silica NPs (SiO2 NPs) on the uptake of iron oxide NPs (Fe2O3 NPs) by the zooplankton Daphnia magna. Both SiO2 NPs and Fe2O3 NPs were well dispersed in the experimental medium without significant heteroaggregation. Although all three sizes of SiO2 NPs inhibited the uptake of Fe2O3 NPs, the underlying mechanisms differed. SiO2 NPs smaller than the average mesh size (∼200 nm) of the filtering apparatus of D. magna reduced the accumulation of Fe2O3 NPs through uptake competition, whereas larger SiO2 NPs inhibited the uptake of Fe2O3 NPs mainly by reducing the water filtration rate of the daphnids. Overall, in evaluations of the risks of NPs in the natural environment, the different mechanisms underlying the effects of NPs of different sizes on the uptake of dissimilar NPs should be considered.

Enhancing Sediment Bioaccumulation Predictions: Isotopically Modified Bioassay and Biodynamic Modeling for Nickel Assessment.

Quantifying metal bioaccumulation in a sedimentary environment is a valuable line of evidence when evaluating the ecological risks associated with metal-contaminated sediments. However, the precision of bioaccumulation predictions has been hindered by the challenges in accurately modeling metal influx processes. This study focuses on nickel bioaccumulation from sediment and introduces an innovative approach using the isotopically modified bioassay to directly measure nickel assimilation rates in sediment. Tested in sediments spiked with two distinct nickel concentrations, the measured Ni assimilation rates ranged from 35 to 78 ng g-1 h-1 in the Low-Ni treatment and from 96 to 320 ng g-1 h-1 in the High-Ni treatment. Integrating these rates into a biodynamic model yielded predictions of nickel bioaccumulation closely matching the measured results, demonstrating high accuracy with predictions within a factor of 3 for the Low-Ni treatment and within a factor of 1 for the High-Ni treatment. By eliminating the need to model metal uptake from various sources, this streamlined approach provides a reliable method for predicting nickel bioaccumulation in contaminated sediments. This advancement holds promise for linking bioaccumulation with metal toxicity risks in sedimentary environments, enhancing our understanding of metal-contaminated sediment risks and providing valuable insights to support informed decision-making in ecological risk assessment and management.

Toward Citizen Science-Based Ocean Acidification Observations Using Smartphone Devices.

pH is a key parameter in many chemical, biological, and biogeochemical processes, making it a fundamental aspect of environmental monitoring. Rapid and accurate seawater pH measurements are essential for effective ocean observation and acidification investigations, resulting in the need for novel solutions that allow robust, precise, and affordable pH monitoring. In this study, a versatile smartphone-based environmental analyzer (vSEA) was used for the rapid measurement of seawater pH in a field study. The feasibility of the use of the vSEA algorithm for pH quantification was explored and verified. When used in conjunction with a three-dimensional (3D)-printed light-proof shell, the quality of captured images is guaranteed. The quantitative accuracy of vSEA pH measurements reached 0.018 units with an uncertainty of <0.01, meeting the requirements of the Global Ocean Acidification Observing Network (GOA-ON) for "weather" goals (permitting a maximum pH uncertainty of 0.02). The vSEA-pH system was successfully applied for on-site pH measurements in coastal seawater and coral systems. The performance of the vSEA-pH system was validated using different real-world samples, and t-test results showed that the vSEA-pH system was consistent with pH measurements obtained using a state-of-the-art benchtop spectrophotometer (t = 1.986, p = 0.7949). The vSEA-pH system is applicable to different types of smartphone devices, making it possible for vSEA-pH to be widely promoted for public citizen use. The vSEA-pH system offers a simple, accurate, and applicable method for the on-site measurement of seawater pH, assisting the large-scale monitoring of ocean acidification by allowing the contribution of citizen science-based data collection.

Interspecies calibration for biomonitoring metal contamination in coastal waters using oysters and mussels.

Differences in metal bioaccumulation among species make it difficult to compare biomonitoring results obtained using different marine bivalve species. To address this challenge and improve the interpretation of biomonitoring data, we studied the toxicokinetic mechanisms underlying these differences and developed a method to estimate seawater metal concentrations based on metal concentrations in the organisms. We transplanted six common species of oysters and mussels found in Chinese coastal waters into the Jiulong River estuary and monitored metal concentrations in the organisms, water, and suspended particles every three days over a six-week period. A one-compartment first-order toxicokinetic model was used to describe the relationship between metal bioaccumulation and metal concentrations in the environment. The model parameters, including aqueous uptake (ku) and dietary assimilation (kp) rate constants, and elimination rate constant (ke), were estimated using a Markov Chain Monte Carlo fitting method with a priori information from a systematic review we conducted. The toxicokinetic model successfully fitted the temporal changes in metal bioaccumulation in all six bivalve species and explained the interspecies differences. Using the calibrated models, we were able to calculate metal concentrations in the seawater at the bivalve collection sites and enable comparisons of biomonitoring data across multiple species. In conclusion, we have established a toxicokinetic framework to explain interspecies differences in metal bioaccumulation in six commonly found bivalves and provided a useful tool for interpreting biomonitoring data in coastal environments.

Higher Risks of Copper Toxicity in Turbid Waters: Quantifying the Bioavailability of Particle-Bound Metals to Set Site-Specific Water Quality Criteria.

In coastal waters, particulate metals constitute a substantial fraction of the total metals; however, the prevalent water quality criteria are primarily based on dissolved metals, seemingly neglecting the contribution of particulate metals. Here we developed a method to quantify the toxicity risk of particulate metals, and proposed a way to calculate modifying factors (MFs) for setting site-specific criteria in turbid waters. Specifically, we used a side-by-side experimental design to study copper (Cu) bioaccumulation and toxicity in an estuarine clam, Potamocorbula laevis, under the exposure to "dissolved only" and "dissolved + particulate" 65Cu. A toxicokinetic-toxicodynamic model (TK-TD) was used to quantify the processes of Cu uptake, ingestion, assimilation, egestion, and elimination, and to relate mortality risk to tissue Cu. We find that particulate Cu contributes 40-67% of the Cu bioaccumulation when the suspended particulate matter (SPM) ranges from 12 to 229 mg L-1. The Cu-bearing SPM also increases the sensitivity of organisms to internalized Cu by decreasing the internal threshold concentration (CIT) from 141 to 76.8 µg g-1. MFs were derived based on the TK-TD model to consider the contribution of particulate Cu (in the studied SPM range) for increasing Cu bioaccumulation (MF = 1.3-2.2) and toxicity (MF = 2.3-3.9). Water quality criteria derived from dissolved metal exposure need to be lowered by dividing by an MF to provide adequate protection. Overall, the method we developed provides a scientifically sound framework to manage the risks of metals in turbid waters.

Label-Free Imaging of Humic Substance Bioaccumulation by Pump-Probe Microscopy.

Humic substances (HS) are the most abundant forms of natural organic matter on the earth surface. Comprised of decomposed plant and animal materials rich in carbon, oxygen, hydrogen, nitrogen, and sulfur complexes, HS facilitate global carbon and nitrogen cycling and the transport of anthropogenic contaminants. While it is known that HS also interact with organisms at different trophic levels to produce beneficial and harmful effects whether HS exert these biological effects through accumulation remains unknown. Current radiolabeling techniques, which only detect the amount of accumulated radiolabels, cannot visualize the transport and accumulation behavior of HS. Here, using a label-free method based on pump-probe microscopy, we show HS entered the protozoan Tetrahymena thermophila, zebrafish embryos, and human cells and exerted direct effects on these organisms. HS accumulated in the nucleus of T. thermophila, chorion pore canals of zebrafish embryos, and nucleus of intestinal and lung cells in a concentration- and time-dependent way. Epigenetic and transcriptomics assays show HS altered chromatin accessibility and gene transcription in T. thermophila. In zebrafish larvae, HS induced neurotoxicity, altering spontaneous muscle contraction and locomotor activity. Detailed images showing HS accumulation in our study reveal new insights on the ecological and environmental behavior of HS.

[Toxicity Testing Organisms for Marine Ecotoxicological Research in China].

Since the late 1970s, marine ecotoxicology began to sprout and develop in China. Based on the principles of dose-response relationships, some marine organisms are used in toxicity tests to evaluate the impact of marine pollutants on marine organisms and marine ecosystems. At the early stage, marine ecotoxicological research mainly focused on the bioaccumulation, biomagnification, and biodegradation of traditional pollutants such as heavy metals, radioactive elements, organotin, petroleum hydrocarbons, and pesticides, as well as their toxic effects on survival, growth, and other physiological indicators. With the development of Chinese industry, marine pollution has become increasingly serious. In addition to the traditional marine pollutants, toxicological research has been conducted on emerging pollutants with potential risks to marine ecosystems, such as POPs, emerging organic pollutants, nanomaterials, and microplastics. Moreover, the species of marine organisms used in toxicity testing have become more diverse. The selection of testing organisms is essential for evaluating toxicity correctly. The toxicity tests should be conducted on a variety of organisms from different trophic levels to ensure the comprehensive understanding of the impact of pollutants on marine ecosystems. The major types of marine organisms used in the toxicity testing include marine alga, protozoa, rotifera, annelida, mollusc, echinoderma, arthropoda, cephalopoda, and marine fish, which have been used in the toxicological studies of various marine pollutants. The outcome results can serve as the scientific basis for the ecological risk assessment of marine pollutants and the establishment of seawater quality criteria. It should be noted that the sensitivity of different testing organisms to different types of pollutants is quite diverse. Therefore, in addition to conducting a battery of tests on a variety of species which play important roles in marine ecosystems, elucidating the toxic mechanisms in different species is also important for marine ecotoxicological studies. The application of the above-mentioned organisms in marine ecotoxicology research in recent years is briefly reviewed here. Particularly, the six commonly used marine model species (Skeletonema costatum, Euplotes vannus, oysters, sea urchins, Tigriopus japonicus, and Oryzias melastigma) used in toxicity testing are introduced in detail.

Isotopically Modified Bioassay Bridges the Bioavailability and Toxicity Risk Assessment of Metals in Bedded Sediments.

The application of bioavailability-based risk assessment for the management of contaminated sediments requires new techniques to rapidly and accurately determine metal bioavailability. Here, we designed a multimetal isotopically modified bioassay to directly measure the bioavailability of different metals by tracing the change in their isotopic composition within organisms following sediment exposure. With a 24 h sediment exposure, the bioassay sensed significant bioavailability of nickel and lead within the sediment and determined that cadmium and copper exhibited low bioavailable concentrations and risk profiles. We further tested whether the metal bioavailability sensed by this new bioassay would predict the toxicity risk of metals by examining the relationship between metal bioavailability and metal toxicity to chironomid larvae emergence. A strong dose-toxicity relationship between nickel bioavailability (nickel assimilation rate) and toxicity (22 days emergence ratio) indicated exposure to bioavailable nickel in the sediment induced toxic effects to the chironomids. Overall, our study demonstrated that the isotopically modified bioassay successfully determined metal bioavailability in sediments within a relatively short period of exposure. Because of its speed of measurement, it may be used at the initial screening stage to rapidly diagnose the bioavailable contamination status of a site.

Phycosphere pH of unicellular nano- and micro- phytoplankton cells and consequences for iron speciation.

Surface ocean pH is declining due to anthropogenic atmospheric CO2 uptake with a global decline of ~0.3 possible by 2100. Extracellular pH influences a range of biological processes, including nutrient uptake, calcification and silicification. However, there are poor constraints on how pH levels in the extracellular microenvironment surrounding phytoplankton cells (the phycosphere) differ from bulk seawater. This adds uncertainty to biological impacts of environmental change. Furthermore, previous modelling work suggests that phycosphere pH of small cells is close to bulk seawater, and this has not been experimentally verified. Here we observe under 140 µmol photons·m-2·s-1 the phycosphere pH of Chlamydomonas concordia (5 µm diameter), Emiliania huxleyi (5 µm), Coscinodiscus radiatus (50 µm) and C. wailesii (100 µm) are 0.11 ± 0.07, 0.20 ± 0.09, 0.41 ± 0.04 and 0.15 ± 0.20 (mean ± SD) higher than bulk seawater (pH 8.00), respectively. Thickness of the pH boundary layer of C. wailesii increases from 18 ± 4 to 122 ± 17 µm when bulk seawater pH decreases from 8.00 to 7.78. Phycosphere pH is regulated by photosynthesis and extracellular enzymatic transformation of bicarbonate, as well as being influenced by light intensity and seawater pH and buffering capacity. The pH change alters Fe speciation in the phycosphere, and hence Fe availability to phytoplankton is likely better predicted by the phycosphere, rather than bulk seawater. Overall, the precise quantification of chemical conditions in the phycosphere is crucial for assessing the sensitivity of marine phytoplankton to ongoing ocean acidification and Fe limitation in surface oceans.

Development of a versatile smartphone-based environmental analyzer (vSEA) and its application in on-site nutrient detection.

The citizen-science-based environmental survey can benefit from the smartphone technology used in chemical and biological sensing of a wide range of analytes. Quantification by smartphone-based colorimetric assays is being increasingly reported, however, most of the quantification uses empirical formula or complex exhaustive methods. In this study, a versatile and robust algorithm is proposed to overcome these limitations. A model is established to simulate and analyze the conversion process from the camera's spectral information into RGB (Red, Green, Blue) color information. Moreover, the feasibility of the algorithm for the quantification of different analytes is also explored. Based on this algorithm, a versatile smartphone-based environmental analyzer (vSEA) is built and its reliability, versatility, and analytical performance are comprehensively optimized. The good linearity (R2 ≥ 0.9954) and precision (relative standard deviations < 5.3%) indicates that the vSEA is accurate enough to quantify the nutrients in most natural waters. Furthermore, the vSEA is used for the field measurement of five important nutrients, and the results show no significant difference compared to conventional methods. The vSEA offers a simpler and easier method for the on-site measurement of nutrients in natural water bodies, which can aid in the emergency monitoring of aqueous ecosystems and the performance of citizen-science-based research.

Intestinal uptake and low transformation increase the bioaccumulation of inorganic arsenic in freshwater zebrafish.

Arsenate [As(V)] is the main form of arsenic (As) present in freshwater taken up by freshwater fish. Data on the main uptake tissue, biotransformation, and bioaccumulation in freshwater fish exposed to As(V) were limited, and the reasons for its bioaccumulation in the muscle tissue of freshwater fish remain undetermined. Accordingly, we simulated bioaccumulation and depuration in zebrafish (Danio rerio) exposed to waterborne As(V) by employing a six-compartment physiologically based pharmacokinetic model and As speciation analysis. Modeling and biotransformation suggested that intestines were the main uptake site for waterborne As(V), instead of the gills. This novel finding was evidenced by the higher As transfer constant from water to intestines (k03 = 1.52 × 10-4 L d-1) compared to gills (k02 = 5.28 × 10-5 L d-1). The low concentration and percentage of arsenobetaine (AsB) in the intestines suggested a weak ability to synthesize AsB. Our results showed a substantial proportion of inorganic As in intestines and a relatively substantial percentage in muscle tissue. Therefore, high As(V) uptake in the intestines and lack of biotransformation contributed to high bioaccumulation of inorganic As in freshwater fish. Inorganic As posed concerns due to the human health risks associated with consuming As(V)-contaminated fish and should be addressed.

Physiologically based pharmacokinetic model revealed the distinct bio-transportation and turnover of arsenobetaine and arsenate in marine fish.

Arsenobetaine (AsB) is the major form of arsenic in marine fish; however, its biodynamics within the fish tissues is not well understood. This study simulated the biodynamics and biotransportation (absorption, distribution, and elimination) of dietary AsB and arsenate [As(V)] in the marine grouper Epinephelus fuscoguttatus, by constructing a physiologically based pharmacokinetic (PBPK) model. The transfer rates between different compartments (gill, intestine, liver, heart, kidney, and muscle) and blood were modeled during exposure (14 d) and depuration (20 d). The model showed that AsB had a weak ability to cross the intestinal membranes and circulated slowly in the blood. The newly AsB absorbed from the blood did not enter the hepatointestinal circulation for elimination, but was effectively distributed in liver. Thereafter, it was slowly absorbed and finally stored in the muscle, the most important organ for AsB deposition, at a constant rate of 63.5 d-1. In contrast, As(V) displayed a dynamic behavior, including rapid crossing through the intestinal membranes, quick circulation in the blood and transportation to other tissues, and elimination. Biodynamics coupled with biotransformation illustrated, for the first time, the unique strategies of dietary AsB that passed slowly through the fish intestine with the highest deposition rate in the muscle, thereby contributing to the high AsB bioaccumulation in the muscle tissue of marine fish. CAPSULE: AsB displayed a weaker ability to cross the intestine membranes, slowly absorbed and finally stored in muscle, whereas As(V) displayed rapid crossing the intestine membranes, quick transportation, and elimination.

Application of a Multi-Metal Stable-Isotope-Enriched Bioassay to Assess Changes to Metal Bioavailability in Suspended Sediments.

The direct measurement of particulate contaminant bioavailability is a challenging aspect for the environmental risk assessment of contaminated sites. Here, we demonstrated a multi-metal stable-isotope-enriched bioassay to simultaneously measure the bioavailability of Cd, Cu, and Zn in naturally contaminated sediments following differing periods of resuspension treatment. Freshwater filter-feeding clams were pre-labeled with the isotopes 114Cd, 65Cu, and 68Zn to elevate isotope abundances in their tissues and then exposed to metal-contaminated suspended sediments. The assimilation of sediment-associated metals by clams would decrease the isotope ratios (Cd114/111, Cu65/63, and Zn68/64) in tissues, providing a direct measurement of metal bioavailability. For the sediments tested here, the method revealed bioavailable cadmium and non-bioavailable copper in sediments but was inconclusive for zinc. With a longer resuspension time, the bioavailability of particulate cadmium increased, but that of copper was unaffected. Metal bioavailability predicted using traditional wet-chemical extraction methods was inconsistent with these findings. The study indicated that multi-metal stable-isotope-enriched bioassay provides a new tool for directly assessing metal bioavailability in sediments, and this method is amenable for use in in situ assessments.

Algal Organic Matter Drives Methanogen-Mediated Methylmercury Production in Water from Eutrophic Shallow Lakes.

Algal blooms bring massive amounts of algal organic matter (AOM) into eutrophic lakes, which influences microbial methylmercury (MeHg) production. However, because of the complexity of AOM and its dynamic changes during algal decomposition, the relationship between AOM and microbial Hg methylators remains poorly understood, which hinders predicting MeHg production and its bioaccumulation in eutrophic shallow lakes. To address that, we explored the impacts of AOM on microbial Hg methylators and MeHg production by characterizing dissolved organic matter with Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) and three-dimensional excitation-emission matrix (3D-EEM) fluorescence spectroscopy and quantifying the microbial Hg methylation gene hgcA. We first reveal that the predominance of methanogens, facilitated by eutrophication-induced carbon input, could drive MeHg production in lake water. Specifically, bioavailable components of AOM (i.e., CHONs such as aromatic proteins and soluble microbial byproduct-like materials) increased the abundances (Archaea-hgcA gene: 438-2240% higher) and activities (net CH4 production: 16.0-44.4% higher) of Archaea (e.g., methanogens). These in turn led to enhanced dissolved MeHg levels (24.3-15,918% higher) for three major eutrophic shallow lakes in China. Nevertheless, our model results indicate that AOM-facilitated MeHg production could be offset by AOM-induced MeHg biodilution under eutrophication. Our study would help reduce uncertainties in predicting MeHg production, providing a basis for mitigating the MeHg risk in eutrophic lakes.

Field to laboratory comparison of metal accumulation on aged microplastics in coastal waters.

The ubiquity of microplastics in the environment has attracted much attention on their risks. Though newly produced plastics were considered inert to aqueous metals, a few studies suggest aged microplastics can accumulate metals. Still, knowledge gap exists on the comparability of metal accumulation in field condition and that acquired in controlled laboratory settings. Accordingly, we comparatively assessed the field accumulation and laboratory adsorption of metals on aged microplastics in coastal waters. Microplastics of different polymeric types were aged for 8 weeks at three coastal sites with different contamination levels. Microplastics accumulated metals to substantial concentrations during ageing (median concentrations, µg g-1: Fe = 950, Mn = 94, Zn = 19, Cu = 2.8, Ni = 1.7, Pb = 1.6, and Cd = 0.005). Adsorption capacity of (aged) microplastics was evaluated in laboratory using a stable isotope tracer method. At environmentally realistic concentrations (µg L-1, 114Cd = 1.7, 65Cu = 4.4, 62Ni = 5.4, 206Pb = 0.5, and 68Zn = 13), the median concentrations of newly adsorbed isotopes on the aged microplastics were 0.01, 1.4, 0.07, 0.56, and 1.1 µg g-1, respectively, one to two orders of magnitude higher than those adsorbed on pristine microplastics. However, the composition pattern of metals accumulated on aged microplastics differed from the composition of metals newly adsorbed in laboratory: the prior one reflected the contamination status of ageing sites and varied by polymeric types; whereas the laboratory newly adsorbed metals on aged microplastics were uniformly correlated to particulate Fe and Mn concentrations, suggesting Fe and Mn mineral coatings mediated the ensuing metal adsorption. Such discrepancy unveiled the complexity of metal accumulation behavior in the real environment and highlighted that cares should be taken when translating laboratory findings to risk assessment of metal contaminated microplastics in the real environment.